Roof Installation in Seattle, Kent and Tacoma, WA: Composite, Metal, Flat and TPO Roofs

Fenix Roof Service handles roof installation across the Greater Seattle area, including Seattle, Kent and Tacoma, WA, and installs composite, flat, TPO and metal roofs. The locally and family-owned company serves King, Pierce and Snohomish Counties from 4411 Wallingford Avenue North in Seattle. Every new roof starts with a free estimate and an on-site inspection, and a project manager and an in-house crew complete the job.

 

Roof Installation Services from Fenix Roof Service

Fenix Roof Service installs four roof types for property owners in the Greater Seattle area: composite, flat, TPO and metal roofs. Each type is a system, not just a surface. The roofing material, the deck under it, the flashings, the vents, the boot pipes and the ridge caps all have to work together.

 

Composite shingle installation covers sloped roofs with overlapping shingle courses, finished with ridge caps and sealed around vents and pipes. Metal roof installation uses panels in place of shingles. Flat roof and TPO installation are meant for low-slope sections, where water has to be directed to a drain or an edge instead of simply running downhill.

 

Fenix Roof Service has more than a decade of experience with roofing projects. Your project manager and the in-house crew work together on the job, and the team goes through mandatory training and continual education. The company is rated 4.9 out of 5 on Google (as of 2026-10-02).

 

A new roof is not always the first answer. If the roof has a localized problem, such as a failed boot pipe or a lifted flashing, a targeted roof repair in Tacoma and the surrounding area may be enough. When the whole surface is worn out, a full roof replacement in Tacoma, WA is the better path.

 

Composite, Metal, Flat and TPO Roofs Compared for a New Roof

Choosing the roofing material for a new roof installation in Seattle, Kent or Tacoma starts with the shape of the roof. A sloped roof and a low-slope roof need different systems. Many houses have both: a sloped main roof plus a flat porch, addition or garage section.

 

The table below compares the four roof types Fenix Roof Service installs. Performance depends on the specific product and how it is installed. Ask the estimator about the exact product line, colors and finishes before you sign.

• Composite (shingle) — Strengths: Familiar shingle look; individual shingles, ridge caps and flashings can be repaired as separate components; Limits to weigh: Many seams and courses where debris and moss can settle; Maintenance: Periodic cleaning, sweeping and moss treatment; Where it fits: Sloped roofs where a traditional shingle look is wanted
• Metal — Strengths: Panel system with profile and finish choices; fewer individual pieces than shingle courses on the same slope; Limits to weigh: Detailing at penetrations and edges must be planned carefully; appearance differs from shingles; Maintenance: Keep valleys, gutters and panel seams clear of debris; Where it fits: Sloped roofs where the owner wants a panel look
• Flat roof — Strengths: Built for low-slope areas that a shingle cannot drain; Limits to weigh: Depends on deliberate drainage so water does not sit on the surface; Maintenance: Keep drains and edges clear; inspect after debris builds up; Where it fits: Porches, additions, garages and other low-slope sections
• TPO — Strengths: Single-ply membrane for low-slope roofs with welded seams; Limits to weigh: Drainage and seam detailing decide how it performs; Maintenance: Keep the surface and drains clear; check seams and edges; Where it fits: Low-slope roofs where a membrane system is preferred

 

Roof Deck Preparation and Decisions to Lock Before Tear-Off

Roof deck preparation is the part of a roof installation that homeowners rarely see but that decides how the new roof lies and lasts. Once the old roofing comes off, the deck is exposed. Soft, damaged or uneven areas need to be addressed before any new material goes on.

 

Several decisions are easier and cheaper to make before tear-off than after the crew has started. Settle them with your Fenix Roof Service project manager during the estimate stage so nothing is improvised mid-job.

• Roof type for each section: which areas get composite or metal and which low-slope areas get flat or TPO.
• Deck repairs: how damaged decking found during tear-off will be handled and priced.
• Vents: how the attic will be vented and whether existing vents stay or are replaced.
• Boot pipes and penetrations: which pipe boots and flashings will be replaced with the new roof.
• Flashings at walls, chimneys and valleys: new versus reused.
• Ridge caps and edges: the finish at the ridge and along the eaves.
• Gutters: whether the existing gutters stay or are replaced while the roof is open.
• Transitions: where a sloped section meets a flat or TPO section and how water will be directed across that line.

 

Step-by-Step: How a New Roof Installation Moves from Estimate to Cleanup

A new roof installation with Fenix Roof Service begins with a free estimate and an on-site inspection that evaluates the specific requirements of your roof. The estimate is tailored to that roof. If you want time to think, the company keeps your estimate on file until you call back.

 

The sequence below shows how a typical roof installation unfolds, so you know what each phase involves and what to ask about.

• 1. Request the estimate through the Fenix Roof Service contact form.
• 2. On-site inspection of the roof, deck condition, vents, flashings and gutters.
• 3. Review the estimate and lock the decisions listed above.
• 5. Prepare the house and yard (see the prep list below).
• 6. Tear-off of the old roofing and inspection of the exposed deck.
• 7. Deck repairs where needed.
• 8. Underlayment, flashings and edge details.
• 9. Installation of the composite, metal, flat or TPO roofing.
• 10. Vents, boot pipes and ridge caps finished and sealed.
• 11. Gutter work, if it is part of the scope.
• 12. Cleanup of debris and a final review of the roof with the project manager.

 

What Does It Cost to Install a Roof in Seattle, Kent or Tacoma?

The cost to install a roof in Seattle, Kent or Tacoma depends on the roof itself, and no reliable price range is published on this page. A figure without the roof's size, slope, material and deck condition would only be a guess. Fenix Roof Service prices each roof after an on-site inspection, and the estimate is free.

 

The factors that move the price are the roof area, its pitch and the number of sections, the roofing material, how many layers must be torn off, the deck repairs found underneath, the number of vents, pipes and chimneys to flash, and whether gutters are included.

 

Wondering whether a quote you received is a good one? Compare the scope line by line rather than the total alone. Two estimates with very different totals often cover different work. Use this checklist when you put estimates side by side:

• Prep and protection of the house, landscaping and driveway.
• Tear-off or demolition: how many layers are removed.
• Hidden-damage repairs: how deck replacement is priced if damage appears.
• Underlayment and waterproofing details.
• Flashings at walls, chimneys, valleys and skylights: new or reused.
• Vents, boot pipes and ridge caps included.
• Drainage: gutters, downspouts and low-slope drains.
• Exact roofing material and product line.
• Debris disposal and cleanup.
• Items that are excluded from the price.

 

Roof Installation Mistakes That Cause Rework, and How to Prepare Your Home

Roof installation rework usually comes from decisions left open or details skipped, not from the roofing material itself. Avoiding these mistakes protects both the budget and the schedule.

 

Preparing the home before the crew arrives makes tear-off and cleanup easier. These steps are simple for a homeowner to handle before installation day.

• Mistake: reusing worn flashings or pipe boots under a brand-new roof.
• Mistake: choosing a shingle product for a section that is really low-slope and needs a flat or TPO system.
• Mistake: leaving vents out of the conversation until after the roofing is down.
• Mistake: replacing the roof but ignoring failing gutters that will need to come off later.
• Mistake: comparing estimates by total price only, without checking what each one excludes.
• Prep: move vehicles out of the driveway and away from the house.
• Prep: clear patio furniture, planters and grills from the drip line.
• Prep: take down wall hangings on walls under the roof, since tear-off can cause vibration.
• Prep: cover items stored in the attic.
• Prep: tell the project manager about pets, gate codes and any area of the yard to avoid.

 

Caring for a New Roof in the Greater Seattle Area

New roof care in the Greater Seattle area starts after installation, and Fenix Roof Service works year-round on treatment, cleaning, repair and new roof and gutter installation. The company recommends maintenance after an initial cleaning to help prolong the life of the roof.

 

Fenix Roof Service recommends roof cleaning every three to five years, depending on accumulated roof debris. For homes near trees, a yearly roof blow-off and gutter cleaning is recommended. The company uses soft washing and air cleaning, and notes that air cleaning is the least abrasive of all cleaning methods. Moss removal and moss treatment are also available.

 

Gutters are part of the same water path as the roof. If yours are leaking or sagging, ask about gutter replacement at the same time as the roof, and consider gutter guard installation if trees drop needles and leaves on the property.

 

Fenix Roof Service technicians keep customers updated on the condition of the roof and can handle repairs or replacements when needed. To see finished work, browse the before and after projects. Business hours are Monday through Friday, 8am to 5pm.

 

Tell us what you need

Ready to plan your project? Call Fenix Roof Service at (425) 344-8709 or request an estimate online.

 

Free roof estimate: call (425) 344-8709

On-site inspection, written scope, no obligation.

 

Related services

These pages go deeper on work that usually comes up alongside this one.

• roof installation for Kent homes — composite, flat, TPO and metal roofs
• Tacoma roof installation — materials, steps and what to compare
• roofers — how to choose a roofing contractor
• shingle roofers — shingle roofing for local homes
• our roof replacement service — what a full replacement involves
• the full list of Fenix services