Looking for TPO roofers near you in Seattle, Kent, Tacoma, Renton, Auburn or Federal Way, WA? Fenix Roof Service is a local, family-owned roofing company in business since 2016 that installs TPO roofing and flat roof systems. The crew gets up on your roof, takes photos, shows you what it finds and gives you a free estimate before any work starts.
How Fenix Roof Service Works as a TPO Roofer in the Seattle–Tacoma Area
Fenix Roof Service lists TPO roofing among the systems it installs, alongside flat roof systems, architectural composite shingles and metal roofing. The company also handles skylight replacement, ventilation upgrades and gutters with roof replacement, so a low-slope project does not have to be split between several contractors.
Every job starts with an in-person look at the roof. The crew climbs up, takes photos and walks you through what it found, so the decision about a TPO roof is based on your actual roof rather than a phone guess. The free estimate includes that on-site inspection, and the price is given before anything starts.
Seeing Fenix Roof Service's Work Before You Choose a TPO Roofer
Fenix Roof Service shows photos from its own jobs, labeled with the city where the work was done, and states that it uses no stock photos. The company's published pages do not single out a specific TPO project, so this guide does not describe one.
What a TPO Roof Is and When a TPO Roofer Is the Right Call
A TPO roof is a single-ply membrane system used on flat and low-slope roofs, such as garages, additions, porches, dormers and the flat sections of some homes and small buildings. The section below is general guidance, not a description of any specific job.
Homeowners usually start searching for TPO roofers when a flat section keeps leaking, when water sits on the roof after rain, or when an older flat roof is due for replacement. In each case the first step is the same: someone needs to look at the deck, the drainage and the edges before choosing a material.
TPO Roofing Compared With the Other Systems Fenix Roof Service Installs
TPO roofing sits in a lineup of four main systems Fenix Roof Service installs, and comparing them side by side helps you ask sharper questions at the estimate. The table describes, as general guidance, where each system usually fits and what to raise with the crew; it is not a ranking of cost or lifespan.
| System | Where it generally fits | What to ask at the estimate |
|---|---|---|
| TPO roofing | Flat and low-slope roof sections | How water drains off the roof and how edges, walls and penetrations will be sealed |
| Other flat roof systems | Flat and low-slope sections where a different membrane or method is a better match | Why the crew recommends this system over TPO for your roof |
| Architectural composite shingles | Sloped roofs | How the shingle roof will tie into any flat or TPO section |
| Metal roofing | Sloped roofs and some low-slope designs | Which panel type suits the pitch and how it meets other roof areas |
Fenix Roof Service's Roof Replacement Process and What to Ask for a TPO Roof
Fenix Roof Service documents a process for its roof replacements in general, and its published pages do not describe a separate, TPO-specific installation sequence. The list below shows those documented replacement steps; treat them as the company's general replacement process, not as a confirmed TPO procedure.
Ask the crew at the estimate how each step applies to a TPO membrane on your roof, and have the answer reflected in the written scope. That way the plan for your flat section is stated for your job instead of assumed.
- Free estimate with an on-site inspection and photos
- Site protection and tear-off of old roofing
- Deck repairs where hidden damage is found
- Underlayment, flashings, vents and pipe boots
- New roof finished
- Gutters with roof replacement, if needed
What to Ask and Compare in a TPO Roofing Estimate
A TPO roofing estimate is only useful if you can compare it line by line with another one. Fenix Roof Service gives the price before anything starts, and the checklist below helps you read any estimate you receive, from Fenix or anyone else.
Ask for photos of your own roof. A contractor who has been on the roof can point to soft spots, standing water and failing edges in the pictures. Fenix takes photos during its inspection and shows homeowners what it finds.
Check whether the estimate covers tear-off, and what happens if the deck is damaged. An estimate that says nothing about the deck leaves the biggest unknown open.
- Photos of your own roof, not general pictures
- Tear-off stated clearly in the scope
- Plan for deck repairs if hidden damage is found
- Flashings, vents, pipe boots and wall transitions listed
- Drainage and gutters addressed
- Project manager named for the job
- Price given before work starts
Mistakes That Cause Rework on TPO and Flat Roofs
TPO and flat roof rework often comes from decisions made before the membrane goes down, not from the membrane itself. The points below are general guidance for homeowners comparing TPO roofers.
Covering a damaged deck is a common source of trouble. If the roof under the old surface is soft or rotted, a new membrane on top inherits the problem. Asking how the deck will be checked and repaired where needed avoids that.
Preparing for a TPO Roof Project With Fenix Roof Service
A TPO roof project with Fenix Roof Service goes more smoothly when the property is ready and the paperwork is settled first. Confirm permit needs with the city where the property sits, for example the City of Tacoma or the City of Kent, before work starts.
Clear the area around the house. Move vehicles, outdoor furniture and planters away from the work zone so site protection and tear-off can happen without delays.
- Confirm permit needs with your city
- Move vehicles and outdoor items away from the house
- List interior leaks or stains for the crew
- Ask how gutters will handle water from the flat section
- Ask what cleaning and care the TPO section needs afterward






