Metal Roofers for Seattle, Kent and Tacoma Homes

Fenix Roof Service is a family-owned roofing company that installs metal roofs for homeowners in Seattle, Kent and Tacoma, WA, across King, Pierce and Snohomish Counties. Fenix starts every metal roofing project with a free estimate and an on-site inspection. A project manager and an in-house crew then work together to complete the job. Below you will find what to compare before you hire a metal roofer.

 

How Fenix Roof Service Works as Metal Roofers in the Greater Seattle Area

Fenix Roof Service lists metal roof installation alongside composite, flat and TPO roof installation, and it brings more than a decade of roofing experience to each project. The company is locally and family-owned, based at 4411 Wallingford Avenue North, Seattle, WA 98103.

 

A metal roofing project with Fenix begins with an on-site inspection, so the estimate reflects your actual roof instead of a generic number. Every estimate is tailored to the roof. You can decide right away, or take time to think it over, and Fenix keeps your estimate on file until you call back.

 

On the job, your project manager and the in-house crew work together from start to finish. Fenix says its team goes through mandatory training and continual education to deliver consistent results. Homeowners rate the company 4.9 out of 5 on Google (as of 2026-10-02).

 

For the full scope of new roof work, see the roof installation service page. Fenix works year-round, and office hours are Monday through Friday, 8am to 5pm.

 

Metal Roofing Options Compared With Composite Shingles

Choosing a metal roof starts with knowing which kind of metal system you are being quoted, because metal roofing contractors use the term for several different products. The table below gives general trade descriptions without prices or lifespans. Ask any metal roof specialist which profiles they install and why they recommend one for your house.

 

If you are still weighing materials, the guide on metal roof vs shingles walks through the main differences in more detail.

• Standing seam metal — Strengths: Fasteners are concealed under raised seams; clean lines; Limits to discuss: Needs careful detailing at valleys, walls and penetrations; can show waviness on flat panels; Upkeep: Keep debris out of valleys and gutters; check flashings and sealants at penetrations; Often considered when: You want a long-term metal roof and the roof shape is fairly simple
• Exposed-fastener metal panels — Strengths: Simpler panel system with screws through the face; Limits to discuss: Each screw and washer is a possible leak point over time; Upkeep: Inspect and replace worn fasteners and washers as needed; Often considered when: Common on outbuildings and low-detail roofs; ask whether it suits your home
• Metal shingles or shakes — Strengths: Look closer to traditional roofing with the benefits of metal; Limits to discuss: More pieces and seams than long panels; Upkeep: Clear debris and check edges and flashings; Often considered when: Appearance matters and you want a shingle-like look
• Composite (asphalt) shingles — Strengths: Familiar system; flexible for complex roofs; Limits to discuss: Different upkeep and replacement cycle than metal; Upkeep: Moss treatment, debris removal and gutter cleaning; Often considered when: Budget or roof complexity points away from metal

 

Decisions to Lock Before a Metal Roof Tear-Off

A metal roof replacement goes smoother when the big decisions are settled before the old roof comes off. Metal panels need enough slope to shed water, and the right panel type depends on your roof pitch. Read the guide on minimum slope for a metal roof before you pick a profile.

 

Talk through each item below with your metal roofer during the on-site inspection, so the estimate covers it.

• Panel type, color and finish, confirmed in writing
• Which roof areas are too low in slope for the chosen panel, and what goes there instead
• Underlayment type under the metal
• How vents, plumbing boot pipes and chimneys will be flashed
• Wall-to-roof and roof-to-roof transitions and valley details
• Snow retention or ridge details, if your contractor recommends them
• How the decking will be checked, and how hidden damage will be priced if found
• Whether gutters will be replaced or reconnected to the new roof edge

 

What a Metal Roof Costs and the Factors That Change the Price

The cost of a metal roof in Seattle, Kent or Tacoma depends on your specific roof, and no sourced price range is available for this page. Instead of trusting a single average, get a written estimate after an inspection. Fenix Roof Service offers free estimates with an on-site inspection.

 

Use the factors below to understand why two metal roofing quotes can differ, and ask each contractor the matching question.

• Panel system and metal type — Question to ask the contractor: Which exact panel profile and material is in this price?
• Roof size, pitch and complexity — Question to ask the contractor: How did you measure the roof, and how do valleys, dormers and steep sections affect the price?
• Tear-off and disposal — Question to ask the contractor: Does the price include removing every existing layer and hauling it away?
• Decking condition — Question to ask the contractor: How will rotten or damaged decking be priced if you find it?
• Flashing and penetrations — Question to ask the contractor: Are new flashings, vent and boot pipe details included?
• Underlayment — Question to ask the contractor: Which underlayment is included, and why that one?
• Gutters and trim — Question to ask the contractor: Are gutters, drip edge and trim part of this estimate or separate?

 

Estimate Checklist and Red Flags When Hiring Metal Roofing Contractors

Comparing metal roofing contractors is easier when every written estimate covers the same scope line by line. If one quote looks much lower, check which items it leaves out before you decide.

 

Red flags include a price given without anyone looking at the roof, vague wording like "metal roof, complete" with no panel type, no mention of flashings or decking, and pressure to sign the same day. A clear contractor answers questions in writing and lets you take time to decide.

• Prep: protection of landscaping, siding and driveway
• Tear-off or demolition of existing roofing, and how many layers
• Hidden-damage repairs: how decking replacement is priced
• Underlayment and waterproofing at eaves, valleys and walls
• Flashing at chimneys, walls, vents and boot pipes
• Drainage: gutters, downspouts and the new roof edge
• Materials: panel profile, gauge, finish and color named in writing
• Disposal and cleanup, including metal scraps and fasteners
• Excluded items listed clearly, such as gutters, skylights or interior repairs
• Who manages the job on site and who does the installation

 

Metal Roof Installation Steps and How to Prepare Your Home

Metal roof installation generally follows a set sequence in the roofing trade, though the details vary by roof and contractor.

 

A typical sequence, described as general trade practice, looks like this:

• Inspection and measurement of the roof
• Written estimate and selection of panel, color and trim
• Material ordering
• Site protection and tear-off of the old roofing
• Decking inspection and repair of any damaged areas
• Underlayment installation
• Edge trim, valley and wall flashing
• Panel installation and penetration flashing
• Ridge and final trim
• Gutter connection or replacement, cleanup and walkthrough

 

Homeowner Prep and Mistakes That Cause Metal Roof Rework

Preparing your home for a metal roof project protects your belongings and keeps the crew moving. Move vehicles out of the driveway, clear patio furniture and planters away from the walls, and take fragile items off walls and shelves in rooms under the roof. Keep pets and children away from the work area, and point out any attic access the crew may need.

 

Rework on metal roofs often traces back to decisions made too early or too late. Avoid the mistakes below by settling them during the estimate stage.

• Choosing a panel without checking it suits your roof slope
• Reusing old flashings or pipe boots instead of detailing them for metal
• Skipping a decking check, then finding soft spots after panels arrive
• Leaving gutters out of the plan, so the new roof edge and drainage do not line up
• Changing color or panel type after materials are ordered
• Comparing quotes that do not cover the same scope

 

Caring for a Metal Roof After Installation

A metal roof still needs routine care, and Fenix Roof Service handles that upkeep alongside installation. Fenix recommends roof cleaning every three to five years, depending on accumulated debris, and a yearly roof blow-off and gutter cleaning for homes near trees. The company believes maintenance after an initial cleaning helps prolong roof life.

 

Fenix also offers soft washing, air cleaning, roof sweeping, moss removal and treatment, and annual maintenance. Fenix notes that air cleaning is the least abrasive of all its cleaning methods. Its technicians keep you updated on roof condition and can handle repairs or replacements when needed.

 

Gutters matter to any roof. Fenix handles seamless gutter installation, repair and gutter guards. If you live in Pierce County, see the page on roof replacement in Tacoma, WA. To schedule a free on-site estimate, use the contact form.

 

Free roof estimate: call (425) 344-8709

On-site inspection, written scope, no obligation.

 

Frequently asked questions

What is the biggest problem with metal roofs?

The biggest problems with metal roofs usually come from details rather than the panels themselves. Poor flashing at walls, chimneys and pipe boots, a panel type that does not suit the roof slope, and worn fasteners on exposed-fastener panels can all lead to leaks. Ask your metal roofer how each of these will be handled before work starts.

 

What is the average cost of metal roofs?

The average cost of a metal roof is not something this page can quote, because no sourced price range is available and each roof differs. Panel type, roof size and pitch, tear-off, decking repairs, flashing and gutters all change the price. Fenix Roof Service offers free estimates after an on-site inspection.

 

What are the top 5 metal roofs?

No sourced ranking of the top metal roofs exists for this page, so the useful approach is to compare metal roof types. Common options include standing seam panels, exposed-fastener panels and metal shingles or shakes, each with different strengths and upkeep. Ask Fenix Roof Service which profiles fit your roof slope and design.

 

Tell us what you need

Ready to plan your project? Call Fenix Roof Service at (425) 344-8709 or request an estimate online.

 

Related services

Homeowners reading this page often look at these next.

• our metal roof installation service in Tacoma — planning, estimates and what to expect
• read about flat roof materials — membranes and what suits each building
• our guide to minimum slope for a metal roof — a panel-by-panel guide
• how metal roofing compares with shingles — which one fits your home
• roof installation in Kent — composite, flat, TPO and metal roofs
• browse all roofing, gutter and cleaning services